
Timber flooring questions
Timber Flooring
Can you match my existing boards?
Usually, yes. We identify the species and board width, source the closest match and sand old and new together so the finish is consistent.
Can solid timber go over a concrete slab?
Yes, with the right preparation. We test the slab for moisture, then lay over a moisture barrier and plywood or use a direct-stick system, depending on the site.
Engineered Timber
Is engineered flooring real timber?
Yes. It has a genuine hardwood surface layer bonded to a stable backing layer. It is not solid hardwood throughout, and its surface is not a printed image like laminate.
Can engineered floors be sanded?
Sometimes. It depends on the remaining thickness and condition of the real timber wear layer, as well as the manufacturer's guidance. We assess the boards before recommending sanding.
Will it meet my body corporate acoustic rules?
We install with rated acoustic underlay and can supply the documentation your owners corporation asks for.
Sanding & Polishing
How dusty is floor sanding?
Much less than it used to be. Our machines are connected to extraction and we vacuum between every pass. Expect a light film to wipe down, not a house full of dust.
Can you change the colour of my floor?
Yes. Once the boards are bare we can stain them darker, limewash them lighter or tone down yellow and orange. We test on your actual floor first.
Timber Floor Repairs
Can you replace individual damaged boards?
Damaged sections can be assessed for replacement. The approach depends on the floor construction, access and the condition of surrounding boards.
Will replacement boards match the existing floor?
We consider timber species, width and appearance when planning replacements. Natural variation, age and previous finishes mean an exact colour or grain match cannot be guaranteed.
Can squeaky boards and gaps be repaired?
Loose or squeaky boards need assessment to identify movement and its cause. Gap filling may be appropriate in some areas, but the floor's stability and condition must be considered first.
Should the floor be sanded after repairs?
Sanding and polishing suitable timber can help old and replacement boards blend. Engineered flooring must be assessed against the remaining surface and manufacturer guidance before sanding.
Timber Stair Treads
Can stair treads match my timber floor?
Treads can be planned around the floor's species, tone and finish. Natural variation and the age of existing timber mean an exact colour and grain match should not be assumed.
Do you offer solid and engineered options?
Both options can be discussed. The appropriate construction depends on the staircase and the selected flooring, so suitability is assessed before the work is agreed.
Are the treads finished on site?
The treads are made, fitted and finished on site as part of the agreed scope, with the adjacent flooring and landings considered when choosing the finish.
Which projects include stair tread work?
The portfolio includes Sunbury, Sorrento, Greenvale, Essendon and Doncaster stair projects. Their project pages describe the recorded work and provide a starting point for discussing your own stairs.
Parquetry
What is the difference between herringbone and chevron?
Herringbone uses rectangular blocks laid at right angles. Chevron blocks are cut on an angle so they meet in a clean point. Chevron has more waste and more cutting.
Does parquetry cost more than straight boards?
Every floor is different, so we price each project individually after a site measure. Request an estimate and we'll come back to you quickly with a clear quote.
Can my old parquetry be restored?
In most cases. We lift and re-glue loose blocks, replace damaged ones with matching timber, then sand and recoat the whole floor.
Solid or engineered parquetry?
Solid can be sanded more times. Engineered is more stable over slabs and quicker to lay. We'll recommend one after seeing the subfloor.

