Learn · Melbourne homeowners

Learn More About Timber Flooring

Choosing a timber floor is not simply choosing a colour. The board’s construction, the condition of the surface beneath it, the way it meets adjoining rooms and the finish all affect the result. For a Melbourne renovation, an existing suspended timber floor presents different questions from a concrete slab in an extension or an apartment with acoustic requirements.

This guide sets out the decisions worth making before you order boards. Start with the building and how you use it, then compare real timber samples. A floor that suits the structure and daily life is a better choice than one selected from a photograph alone.

Finished engineered timber flooring in the Brighton Residence kitchen, Brighton, by Shiny Floors

Start with the floor you already have

In an older house, establish whether the existing boards are structural flooring or a covering installed over another subfloor. Check for movement, loose boards, local damage and changes in level. An attractive exposed floor may be recoverable, but a professional assessment should establish whether enough sound timber remains for sanding and whether repairs are needed first.

For new flooring, identify the substrate in every room. Concrete, plywood, particleboard and existing timber each require a suitable installation system. Ask about flatness, moisture and structural condition rather than assuming a new slab or recently renovated room is ready. A new floor cannot correct an unresolved leak or unstable support beneath it.

Understand solid, engineered and laminate construction

Solid timber boards are timber through their thickness. They can be sanded multiple times when their condition and remaining usable thickness allow it. Timber responds to changes in moisture, so the installation must accommodate movement. The appropriate fixing method, moisture assessment and expansion provisions depend on the board and the building.

The engineered flooring described by Shiny Floors has a genuine hardwood surface layer bonded to a stable backing layer. It is real timber at the surface, but it is not solid hardwood. Its layered construction can improve dimensional stability; it does not make the floor waterproof. Check the exact product’s installation and maintenance instructions.

Laminate is a different material: an MDF core with a printed image layer rather than a real timber wear layer. It cannot be sanded to expose fresh timber. Product construction matters when you are considering future restoration, not just how convincing the surface looks. Read our separate comparison guide before choosing between engineered and solid timber.

Choose a species for appearance and use

Spotted Gum, Blackbutt, Tasmanian Oak and European Oak offer distinct colour ranges and grain. Natural variation within a species is normal. A small sample represents part of that range, not a promise that every board will match it. Ask to see several boards, including the grade you intend to buy, under light similar to your home.

A Janka hardness rating measures resistance to indentation under a standard test. It helps compare timber, but it is not a scratch rating and does not describe the performance of a coating. Sand tracked in from outdoors, furniture movement and an unsuitable cleaning method can damage even a hard species. Construction, finish and daily care also matter.

Grade is an appearance decision

Grades describe permitted natural features under the applicable grading system. They are not a simple ladder from bad to good timber. Knots, gum veins and colour changes may be part of the appearance you want. Confirm the supplier’s grading description, because terminology and permitted features vary, especially between Australian hardwood and imported oak products.

Compare finishes on a real board

A clear coating, an oil system and a coloured factory finish can make the same timber look quite different. Matte, satin and higher-sheen finishes reflect light differently. Examine a sample horizontally, where the floor will sit, rather than only against a wall. Melbourne homes with large windows can reveal grain and sheen differently through the day.

Prefinished boards arrive with their surface finish applied. Site-finished flooring is sanded and coated after installation. The distinction affects scheduling, access and future maintenance. Neither description alone establishes durability. Ask for the specific coating system, its care instructions and whether local repairs or a maintenance coat are possible for that product.

Resolve moisture and subfloor preparation early

Timber and its surroundings exchange moisture. Indoor humidity, ventilation, wet work and leaks can change the conditions a floor experiences. Product requirements should guide moisture testing and any conditioning or acclimatisation. Leaving every product in unopened boxes for an arbitrary number of days is not a substitute for measuring conditions and following its instructions.

Subfloor preparation may include securing loose panels, removing residues, grinding high areas or applying an approved levelling system. Moisture protection is a separate question from flatness. Ask for the planned preparation to be described in the estimate, with any assumptions clearly identified. Work discovered after coverings are removed should be discussed before proceeding.

Plan installation around the whole home

Board direction changes how rooms connect visually and how cuts meet walls. Wide boards, angled rooms and parquetry layouts need careful setting out. Review the starting line, transitions and the treatment of thresholds before work begins. A direction that looks straightforward on a plan may interact with a hallway or an out-of-square wall on site.

Check finished floor height at doors, stairs, cabinetry and adjacent tiles. In the Brighton Residence project, the documented work included a marine-ply build-up beneath 14mm engineered flooring. That is a useful reminder that the visible board is only one part of the assembly. Your own build-up must be designed for your substrate and required heights.

For an apartment, obtain the owners corporation’s flooring requirements before committing. Acoustic performance concerns the installed floor assembly, not simply a label on an underlay pack. Installation rules, access arrangements and approval documents can affect the programme. For houses, also discuss furniture storage, pets, access routes and whether any part of the home must remain usable.

Look after the finish, not just the timber

Use the flooring or coating manufacturer’s cleaning instructions. Remove grit with an appropriate soft attachment or mop, use protective pads beneath furniture and place suitable mats at entrances. Wipe spills promptly. Avoid soaking the floor, and do not assume a steam mop is safe: heat and moisture may be incompatible with the product or finish.

Sunlight can change timber and finishes over time. Rugs and furniture may leave areas ageing at different rates. Window coverings and sensible rug rotation can help manage uneven exposure, but natural colour change should not be confused with a manufacturing defect. Ask about maintenance intervals before purchase rather than waiting until wear becomes obvious.

Frequently asked questions

Can I install timber flooring over a concrete slab?

Often, but the board and installation system must be suitable for the slab. Moisture, flatness and surface condition need assessment. Any required moisture protection, levelling and adhesive must form a compatible system; a slab is not automatically ready because it looks dry.

Is a harder timber always the best floor?

No. Janka hardness helps compare resistance to indentation, but your choice also depends on appearance, construction, finish and maintenance. Hard timber can still scratch. Choose a species and coating for the room’s use and confirm the product’s specific care requirements.

Should I see samples before deciding?

Yes. Compare several real boards so you can see the colour range, natural features and finish. Shiny Floors’ showroom is at 96 Scanlon Drive, Epping VIC 3076, with visits strictly by appointment only. Bring photographs of the room and samples of adjoining finishes if you have them.

Can an existing timber floor be restored instead of replaced?

Sometimes. A floor assessment should check its construction, remaining usable thickness, movement and damage. Sanding can renew a suitable surface, but it cannot solve structural faults or guarantee removal of deep stains. Repairs may need to happen before sanding and coating.

Discuss your floor.

See our timber flooring service, compare colours and species, or visit the showroom strictly by appointment only.

Get an Estimate
Your next project

Get a Free Estimate

Frequently asked questions →
CallGet an estimate