Floor preparation during replacement of water-damaged engineered flooring at Garden State Hotel, Melbourne CBD, by Shiny Floors
Timber Floor Repairs

Timber floor repairs Melbourne

Repair damaged boards, restore stability and plan a finish that brings the floor together.

Overview

Keep the sound timber. Address the damaged sections.

Our timber floor repairs start with assessing the boards and the base beneath them. Damaged or water damaged floorboards may need replacement, with the cause of moisture addressed before new timber is installed.

For floorboard repairs, matching species and board width helps connect replacement sections to the existing floor. Colour, grain, age and previous finishes can affect the match; an exact visual match should not be assumed.

A hardwood floor repair can also involve securing squeaky or loose boards and assessing gaps. Gap filling is considered against board movement and floor condition, rather than used as a substitute for fixing an unstable floor.

Where the timber is suitable, repair can be followed by sanding and polishing across the adjoining floor so old and new blend more consistently. Engineered boards require assessment of their remaining surface and manufacturer guidance before sanding is recommended.

At Garden State Hotel, we replaced 120m² of water-damaged engineered flooring within four days. That documented job is a proof point for replacement work, not a promised timeframe for every repair. Explore its case study and the Preston commercial repair project below.

Who it suits

  • Homes with damaged or loose timber boards
  • Water-damaged flooring once the moisture cause is addressed
  • Commercial premises needing board repair and refinishing
Options

Repair approaches

The condition of your floor determines which work is appropriate.

Replacement engineered timber flooring being installed at Garden State Hotel, Melbourne CBD, by Shiny Floors

Board replacement

Replace damaged sections, considering species, width and the existing floor construction.

Subfloor preparation for the Garden State Hotel flooring replacement, Melbourne CBD, by Shiny Floors

Secure and prepare

Assess squeaks, loose boards and gaps before deciding how to stabilise and prepare the floor.

Completed engineered floor after replacement work at Garden State Hotel, Melbourne CBD, by Shiny Floors

Repair and refinish

Sand and polish suitable timber after repairs to help connect old boards and new sections.

See all colours & finishes →

Process

How the job runs

  1. 01

    Assess the floor

    Review damage, movement, moisture causes and the floor's construction.

  2. 02

    Plan the repair

    Discuss replacement timber, board matching and any preparation needed beneath the floor.

  3. 03

    Repair and finish

    Complete the agreed repairs, then sand and polish where the timber is suitable for refinishing.

FAQ

Questions we get asked

Can you replace individual damaged boards?

Damaged sections can be assessed for replacement. The approach depends on the floor construction, access and the condition of surrounding boards.

Will replacement boards match the existing floor?

We consider timber species, width and appearance when planning replacements. Natural variation, age and previous finishes mean an exact colour or grain match cannot be guaranteed.

Can squeaky boards and gaps be repaired?

Loose or squeaky boards need assessment to identify movement and its cause. Gap filling may be appropriate in some areas, but the floor's stability and condition must be considered first.

Should the floor be sanded after repairs?

Sanding and polishing suitable timber can help old and replacement boards blend. Engineered flooring must be assessed against the remaining surface and manufacturer guidance before sanding.

Ready to start your project?

Send us the space, the timber you like and your timing. We'll come back with a considered estimate.

Get Estimate
Your next project

Get a Free Estimate

Frequently asked questions →
CallGet an estimate