Timber Flooring Cost in Melbourne
There is no single useful figure for timber flooring cost without knowing the floor and the work beneath it. Two Melbourne homes with the same measured room area can need different preparation, installation systems and detailing. A board-only price also describes something very different from a completed floor ready for the intended use.
This guide explains what changes the scope of an estimate and how to compare proposals. It does not publish a generic rate or substitute for a site assessment. Use it to collect the details that matter, understand exclusions and request a written estimate for your own rooms, substrate and chosen timber.

Define the job before comparing estimates
Start by distinguishing supply only, supply and installation, and restoration of an existing floor. Ask which rooms are included, how the area is measured and what happens at thresholds, stairs and adjoining finishes. An estimate for empty, straightforward rooms may not include moving furniture, removing an old floor or altering doors.
For a renovation, describe the existing covering and what you know about the base beneath it. Photographs are helpful, but concealed conditions can remain unknown until removal. A responsible scope identifies assumptions and explains how unexpected preparation will be discussed. Compare the same work rather than treating the final total as the only useful information.
The board specification changes the material scope
Solid and engineered timber are different constructions. Species, grade, board width, overall thickness, wear-layer thickness for engineered boards, surface texture and finish all form part of the specification. Ask for the exact product rather than a broad label such as oak flooring. Similar-looking samples can represent different boards and maintenance options.
Shiny Floors describes its engineered range as a genuine hardwood surface layer bonded to a stable backing. That does not make it solid hardwood. Confirm the particular product being proposed and its manufacturer guidance. A cheaper-looking comparison is not like-for-like if it has a different construction, finish, grade or installed assembly.
Allowance for cuts is not the same as room area
Ordering must account for the layout and cuts, not just the sum of room dimensions. Angled rooms, long narrow areas and patterned layouts may require different allowances. Ask whether material quantities and any spare boards are included. Do not apply a universal waste percentage without considering the product and the actual plan.
Subfloor preparation can be a substantial part of the work
The surface beneath the boards must suit the installation system. Loose panels, uneven concrete, old adhesive residues or damaged timber can require preparation. Levelling, securing, grinding or replacing substrate sections are different tasks. Ask whether the estimate includes the assessed work or carries an allowance pending removal of the existing covering.
Flatness and moisture are separate questions. A floor may look level while still needing moisture assessment or an appropriate moisture-management system. An ongoing leak or damp subfloor should be addressed at its source. No estimate for new boards should imply that covering the problem is a sufficient repair.
The Brighton Residence project records a marine-ply build-up beneath 14mm engineered boards and attention to tile transitions. That example shows why the visible flooring alone does not describe a complete job. Your own required build-up depends on substrate condition and finished levels; it should not be copied from a project with a different structure.
Installation method and layout affect labour
An approved direct-bonded system, a floating installation and a solid-timber fixing arrangement involve different materials and procedures. The method must suit the product and substrate. Compare the proposed system, including compatible adhesive or underlay where applicable, rather than assuming all labour described as installation covers equivalent work.
Setting out also matters. Board direction, a hallway connection, angled walls and parquetry patterns require planning before cutting begins. The Diamond Creek Residence project records 14mm engineered flooring with board direction planned around changing angles. It illustrates a site-specific layout decision, not a universal rule about how every room should be installed.
Transitions and stairs need explicit scope
Ask how the timber meets tiles, carpet, external doors and other rooms. Trims, thresholds, stair nosings and door adjustments may need separate detailing. A seamless-looking junction in a photograph depends on compatible levels and an appropriate assembly. Agree which details are included so they do not become unplanned decisions after the main floor is installed.
Removal, access and an occupied home change the programme
Removing carpet, tiles or an existing bonded floor involves different work and disposal requirements. Access routes, stairs, parking arrangements and the ability to bring materials close to the work area also affect planning. Tell the estimator whether the home will be occupied and whether some rooms must remain accessible throughout.
Confirm who moves and stores furniture, removes appliances where necessary and protects adjacent finishes. Coordinate other trades before flooring work starts. New wet work, dust-producing tasks and later cabinet changes can interfere with installation or finishing. A clear programme reduces avoidable handling and rework, but no fixed duration should be assumed from another project.
Apartments require assembly and approval checks
For an apartment, request the owners corporation’s requirements before selecting a system. Acoustic performance relates to the complete floor assembly, not just the board or a marketing claim on an underlay. Approval documents and any applicable building requirements should be reviewed before ordering or removing an existing covering.
Building access rules, lift protection, permitted working times and material deliveries may also affect the scope. Provide those details when requesting an estimate. An installation system suitable for a detached house should not be assumed appropriate for an apartment slab or acceptable under the building’s flooring rules.
Restoration has a different set of cost drivers
Sanding and polishing concerns an existing surface rather than supplying a completely new floor. Its scope depends on usable timber, repairs, old finish, edge access and the chosen coating system. Deep stains or damaged boards may need repairs beyond sanding. Ask whether an assessment supports restoration before comparing it with replacement.
Solid timber can be sanded multiple times where condition permits. Engineered timber needs sufficient remaining real timber and manufacturer guidance. Laminate has an MDF core with a printed layer and cannot be sanded as timber. A restoration proposal should identify the existing product and explain any limits on the result, not promise a new-looking floor regardless of damage.
Coating work also affects access. Dry-to-recoat, light-use and full-cure times are different and product-specific. Ask when furniture and rugs can return and whether your household needs alternative accommodation. Those practical arrangements may matter to your overall renovation planning even when they are not part of the flooring contractor’s estimate.
Use a written checklist for a fair comparison
Request the product name and specification, measured scope, removal and disposal, subfloor preparation, installation system, finishes and transitions. Check whether taxes and any necessary site-specific allowances are clearly stated. Ask what is excluded and how variations are approved. Do not assume a missing item is included simply because another proposal mentions it.
To request an estimate, prepare your suburb, approximate room dimensions, photographs, existing floor type and desired timing. Add apartment requirements or details of adjoining surfaces where relevant. Shiny Floors has 26 years' experience; the useful next step is still an assessment of your particular floor, not a generic number detached from its condition and the work required.
Frequently asked questions
Why not publish one timber flooring rate for Melbourne?
A single rate cannot describe board specification, removal, substrate preparation, installation method and finishing details for every home. A useful estimate sets out those items for the actual rooms and floor conditions, with assumptions and exclusions made clear.
What should I send to request an estimate?
Send your suburb, approximate room dimensions, photographs of the existing floor, preferred timber or finish and intended timing. Include known substrate details, transitions, stairs and any apartment requirements. A site assessment may still be needed to confirm preparation and installation scope.
Is sanding always cheaper than replacing the floor?
Do not assume a universal comparison. Restoration and replacement have different scopes, and a floor must first be suitable for sanding. Repairs, remaining timber, damage and the chosen finish affect the work. Compare written proposals for a realistic outcome rather than a category alone.
What if problems are found after the old floor is removed?
An estimate should identify concealed-condition assumptions and how additional work is approved. Once the substrate is exposed, preparation may need reassessment. Ask for the reason, proposed work and effect on timing to be discussed before a variation proceeds.
Discuss your floor.
See our timber flooring service, compare colours and species, or visit the showroom strictly by appointment only.
Get an Estimate