How much does floor sanding and polishing cost in Melbourne?
The floor sanding and polishing cost for a Melbourne home depends on what is being restored, not simply the size of the rooms. A sound floor with straightforward access presents a different job from boards hidden beneath carpet, damaged sections or a staircase needing detailed work. A useful quote explains those differences rather than offering an isolated rate.
This guide outlines the information that helps define the scope. There are no published dollar figures: your floor needs its own assessment. When comparing proposals, look at the preparation, repairs, coating system and exclusions together. A lower total is not necessarily the same job with the same result.

Floor area and the limits of a square-metre rate
The floor sanding cost per square metre is a way of expressing a measured scope, but area alone does not describe the work. An open room is different from several small rooms with edges, doorways and restricted corners. Equipment setup and the sequence of sanding and coating also form part of the job.
Ask which rooms are included and whether cupboards, hallways and landings have been measured. Stairs should be described separately rather than treated as ordinary flat floor area. Your own measurements are useful for an initial enquiry, but the written quote should identify the actual spaces and explain any assumptions used before an on-site assessment.
Board condition and previous coatings
The surface needs to be assessed for movement, unevenness, damage and remaining usable timber. A floor that has been sanded before may have different limits from one being refinished for the first time. Deep marks cannot always be removed safely. The quote should distinguish achievable surface improvement from damage that needs board replacement or another repair.
Old coatings affect preparation. Their condition, compatibility with the proposed system and how readily they can be removed may change the work involved. Paint, adhesive residue and other contamination should be identified where possible. Photographs can help start that discussion, but they cannot reliably show everything about a coating or the timber beneath it.
Repairs, gaps and damaged sections
Loose boards, damaged edges and water-affected sections need attention before finishing. An unresolved leak or unstable support cannot be corrected with a new coating. Replacing boards also involves sourcing suitable timber and considering species, width and appearance. Natural variation and age can leave differences between old and new sections even after they are sanded together.
Gap filling should be assessed against movement and floor condition rather than assumed to be appropriate everywhere. Ask which repairs are included, which are allowances and what happens if further damage is found. Keeping these items explicit makes the floorboard polishing cost easier to understand and reduces the risk of comparing refinishing alone with a proposal that includes substantial repair work.
Stairs and staining add detail
Stair treads, nosings and landings involve different shapes and access from a broad floor. Their existing finish and condition also matter. A quote should state which stair surfaces are included, rather than leaving you to infer that all timber visible around a staircase will be restored. Matching the finish to adjacent rooms is another detail worth agreeing before work begins.
Staining changes more than the final coating colour. The timber, preparation and existing marks can influence how evenly a colour takes. Discuss a sample and the intended result, including the limits of matching previously stained boards. A clear finish and a stained floor are different scopes; compare proposals on the same basis if a colour change is part of your renovation.
Water-based versus solvent-based finishes
The selected coating system affects material choices, application and scheduling. Water-based and solvent-based descriptions identify broad categories, not identical products within each group. They can differ in appearance, odour and application requirements. Ask for the product name, intended sheen and care instructions, rather than assuming one category is always the cheapest, toughest or most suitable.
Recoat intervals, light use and full cure are separate considerations governed by the product and site conditions. Do not substitute a generic waiting period for the coating instructions. A quote should identify the system being supplied and the agreed application scope. Your arrangements for returning furniture, rugs and household activity should be discussed alongside that specification, without inventing universal drying times.
Carpet removal, disposal and access
A carpeted room may require removal of carpet, underlay, fixings and residue before the timber can be fully assessed. Check who performs that work and whether disposal is included. A floor hidden beneath coverings can contain repairs or damage that photographs of the room do not reveal. The proposal should explain how newly exposed conditions will be handled.
Access includes more than getting through the front door. Furniture, occupied rooms, apartment requirements and the route for equipment can affect organisation. Discuss parking or building arrangements where relevant, and clarify who clears the rooms. Restricted working periods should be raised early so the quote describes a practical plan instead of assuming unrestricted access throughout the property.
How a quote is measured and documented
Start with a room-by-room list, approximate dimensions and photographs showing the floor and its junctions. An assessment can confirm the measured area, floor construction and visible repair needs. It should also identify edges, stairs, coverings and any spaces excluded from the work. Ask whether the initial estimate is provisional and what must be checked before a firm scope is agreed.
Read the written proposal as a description of work: preparation, repair, sanding, staining if selected, coating and removal responsibilities. Check exclusions, tax treatment and any allowances. If conditions change after coverings are lifted, ask how variations will be documented and approved. Comparable quotes should describe comparable work, with uncertainty made clear rather than buried inside a single total.
Mark the areas you intend to keep untouched, particularly where a hallway connects rooms with different finishes. Ask how the boundary will be handled and whether the proposed coating can stop at that point without an unwanted visual change. A plan should make those boundaries visible. It is also useful to identify fixed cabinetry and other obstacles, because the measured floor and the accessible sanding surface may not be identical.
Keep a copy of the agreed room list and specification when work is booked. If you change the finish or add a room later, ask for the revised scope in writing. This is not about making the enquiry complicated: it gives both parties a shared reference. Clear measurements and responsibilities help you understand what the estimate covers before arranging furniture removal or access to the home.
Sanding versus replacing the floor
Restoration may preserve sound timber and avoid a complete new installation, but it is not automatically the appropriate choice. Remaining material, board stability and damage guide the decision. Solid timber can be sanded multiple times where condition permits. Engineered flooring needs assessment of its remaining real timber surface and manufacturer guidance. Laminate has a printed layer and cannot be sanded as timber.
Replacement involves a different scope, including removal, preparation and new flooring. Consider it where restoration is unsuitable or the proposed renovation requires a different construction. Compare the whole job rather than refinishing against the supply of boards alone. For timber floor sanding Melbourne enquiries, send the existing floor type, room details and known damage so the discussion starts with your property, not an assumed average.
You can also separate essential repairs from optional appearance changes when discussing the proposal. Restoring a serviceable floor and changing its colour are different decisions. Ask which work is necessary for a sound result and which reflects your design preferences. That distinction helps you assess the scope without sacrificing preparation or assuming replacement is the only way to update the room.
Frequently asked questions
Why can’t a square-metre rate describe every floor?
Area does not account for repairs, stairs, old coatings or restricted access. A useful quote defines those items alongside the measured rooms.
Are carpet removal and disposal included?
Only if they are stated in the agreed scope. Ask who removes coverings and fixings, who handles disposal and how hidden damage will be assessed.
Does staining affect the quote?
Staining adds colour preparation and application decisions. Confirm the proposed system and sample result so you compare it with other proposals for the same work.
Can an engineered floor be sanded instead of replaced?
Sometimes, depending on the remaining real timber surface, floor condition and manufacturer guidance. An assessment is needed before restoration is recommended.
What should I send for an estimate?
Send your suburb, approximate room dimensions, floor type, photographs, known damage and access constraints. Mention stairs, carpet removal and your preferred finish.
Discuss your floor.
See our sanding & polishing service, compare colours and species, or visit the showroom strictly by appointment only.
Get an Estimate